Configuring 96 I/O Controls

To configure controls for a 96 I/O:

1 With the 96 I/O selected in the Peripherals list, configure your I/O front panel meters for input or output metering from the Meters pop-up.

2 Click the Analog In tab for the following option:

You can set your operating level on a channel-by-channel basis by selecting Reference Level +4 dBu or –10 dBV. See the 96 I/O Guide for more information on setting operating levels.

 

Hardware Setup for 96 I/O, Analog In page

3 Click the Analog Out tab for the following option:

You can set your output level on a channel-by-channel basis by selecting Reference Level +4 dBu or –10 dBV. See the 96 I/O Guide for more information on setting operating levels.

 

Hardware Setup for 96 I/O, Analog Out page